Welcome to the official website of TAT Electronics Co.,Ltd 

24-hour service hotline:075582370515
Products > BMC1614-1223
20160104 (95)_副本.jpg
  • 20160104 (95)_副本.jpg
  • 20160104 (97)_副本.jpg
  • 20160104 (100)_副本.jpg
  • 20160104 (101)_副本.jpg

BMC1614-1223

1. SPECIFICATION

Electro-Magnetic Buzzer

Built-in oscillating circuit

1

Dimension

Φ16.0×H14.0

2

Net Weight

Approx 2.1g

3

Rated Voltage

12VDC

4

Operating Voltage

615 VDC

5

Rated Current

Max.50mA ,at 12VDC

6

Sound Output

Min. 85dB,at 12VDC,10cm

7

Resonant Frequency

2300±300Hz

8

Tone

Continuous

9

Operating Temperature

-40℃+85

10

Store Temperature

-40℃+85

11

Pin

L1=5.5±0.5,L2=7.0±0.5,Φ=0.7±0.1mm

Dimensions

Unit: mm

1(10).png

*Unit: mm; Tolerance: ±0.5mm Except Specified

*Housing Material: Black PBT

 

2. Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

2.1 Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

2.2 High Temperature Test

The part shall be capable of with standing a storage temperature of +85 for 96 hours.

2.3 Low Temperature Test

The part shall be capable of with standing a storage temperature of -40 for 96 hours.

2.4 Humidity Test

Temperature:+40℃±3  Relative Humidity:90%95% Duration: 48 hours

and expose to room temperature for 6 hours

2.5 Temperature Shock Test

Temperature:70/1hour25/3hours-30/1hour25/3hours (1cycle)

Total cycle: 10 cycles

2.6 Drop Test

Standard Packaging From 1.2m(Drop on hard wood or board of 5cm thick,

three sides, six plain.)

2.7 Vibration Test

Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.

3. Electrical And Acoustical Measuring Condition

3.1 Recommended Setting

2(10).png 

3.2 Recommended Test Circuit

3(10).png 

 

 

4.  Recommended the wave soldering temperature

                   4(10).png